PDA

View Full Version : evo with rear lip???

FastFrontier17
11-28-2005, 12:45 PM
hey guys i need some help...i need to know if you think my exhaust (evo tt) will fit the oem optional rear lip without any problems??

http://i16.photobucket.com/albums/b5/FastFrontier17/PICT0474.jpg
http://i16.photobucket.com/albums/b5/FastFrontier17/PICT0472.jpg
http://forums.clubrsx.com/attachment.php?attachmentid=210362&d=1133302547
http://forums.clubrsx.com/attachment.php?attachmentid=210363&d=1133302617
Fuelie73
11-28-2005, 03:01 PM
It will rub and burn the lip...in fact, I don't think it will fit with your tip up so high. I'm actually suprised that your bumper hasn't burned yet either...
FastFrontier17
11-28-2005, 03:32 PM
it is kinda burnt now...not bad but still a little burnt...
Fuelie73
11-28-2005, 03:41 PM
Are you using stock hangers? My Evo 2 doesn't sit nearly as high as your Evo TT...
http://www.arizonarsx.com/forums/attachment.php?attachmentid=2760&d=1132787935
FastFrontier17
11-28-2005, 03:45 PM
yea im using the stockers....any suggestions at getting it lower? maybe my tip is bigger than yours? :dontknow:
FastFrontier17
11-28-2005, 03:48 PM
shit...i guess i really need to get everything readjusted...the dcrh doesnt fit without banging...oh well...shoulda gotten a damn powergetter
Fuelie73
11-28-2005, 04:22 PM
yea im using the stockers....any suggestions at getting it lower? maybe my tip is bigger than yours? :dontknow:
The tip should be the same for the Evo 2, Evo TT and SP2...4.25", I believe. Only differences between the three are pipe size (3" vs 2.5") and tip (rolled, straight, and titanium rolled) design.
FastFrontier17
11-28-2005, 05:23 PM
2.7 inch piping here...and the can looks the same as yours...only diff is the titanium rolled tip...looks like a piece of titanium held on by sheet metal hucks
FastFrontier17
11-29-2005, 02:39 PM
what would happen if i went to put the lip on ...would it run or just not fit...period
RandyRSX
11-30-2005, 01:07 AM
You should consider getting longer hangers so that the tip sits lower.
idrive
11-30-2005, 01:38 AM
You should consider getting longer hangers so that the tip sits lower.
yea that

-d
FastFrontier17
11-30-2005, 12:25 PM
so how much clearance does the oem lip take away from the stock bumper?