2003 RSX-S Vs. 1980 mustang

[jhay310]

hey guys i need your help im running 1980 mustang for money i dont knw if its a V6 or a V8... but I have an type-S and has COLD AIR INTAKE, DC 421 CERAMIC RACING HEADERS, 2" COSTUM PIPING, 2 1/2" 5ZIGEN AXLEBACK, NRG GROUNDING KIT, AND HONDATA REFLASH MY CAR IN FULLY STRIP... WHAT U GUYS THINK? THANKS FOR THE HELP....

[W1lson]

mods on the mustang?
its pretty old..so unless he keeps it in pristine condition its probably running like a POS.
im sure even a 1980's v8 mustang would run like shit if not properly taken care of.

i say edge to you if its in POS condition

[PrZ]

whit all those Headers your gona smoke him for sure lol

check what mods he have so you dont loose your money

[DC5 ABP]

hmm i believe the early 80s mustangs were either 4 bangers or v8's so if its a 4 cylinder it will be piss slow

[orangekeebler]

www.googlethecarhere.com

[Machina]

hey guys i need your help im running 1980 mustang for money i dont knw if its a V6 or a V8... but I have an type-S and has COLD AIR INTAKE, DC 421 CERAMIC RACING HEADERS, 2" COSTUM PIPING, 2 1/2" 5ZIGEN AXLEBACK, NRG GROUNDING KIT, AND HONDATA REFLASH MY CAR IN FULLY STRIP... WHAT U GUYS THINK? THANKS FOR THE HELP....

A car pulls up, who can it be? It's a fresh El Camino rollin' Kilo G. He rolls down the window and he starts to say "It's all about making that GTA."

[W1lson]

A car pulls up, who can it be? It's a fresh El Camino rollin' Kilo G. He rolls down the window and he starts to say "It's all about making that GTA."

i have all of that on video..

http://youtube.com/watch?v=xXv1Ls2fnSI

[orangekeebler]

http://www.mustangspecs.com/years/80.shtml

Available Engines:
2.3L 2V 4cyl 88hp(MT), 90hp(AT)
2.3L 2V 4cyl 132hp (Turbocharged)
3.3L 1V 6cyl 91hp(MT), 94hp(AT)
4.2L 2V V-8 119hp

unless he has a lot of work done..you should be ok.

[W1lson]

http://www.mustangspecs.com/years/80.shtml



unless he has a lot of work done..you should be ok.

:rotfl: 119hp. OP YOUR IN TROUBLE!

[orangekeebler]

:rotfl: 119hp. OP YOUR IN TROUBLE!

whos to say the guy hasnt done a swap. :p

if he did im going to laugh my ass off.

[W1lson]

whos to say the guy hasnt done a swap. :p

if he did im going to laugh my ass off.

this is high stakes racing son!

OP, bet 3,000 dollars

[Machina]

http://www.mustangspecs.com/carpics/80hatch.jpg


:snap:

[W1lson]

thats just hydraulics, the front isnt really doing that :shady:

[jhay310]

:rotfl: 119hp. OP YOUR IN TROUBLE!

hahaha! woo... scary... LOL:rotfl: well thanks guys.. now i have confident to run him... well were betting $300, thanks for the comments guys...

[big18g]

ima laugh my ass of when you lose to a 119hp car:lawl:

[crazymark316]

Wow @ the ignorance in this thread.

[asdff]

in for vid

[LickyMYwalker]

hey guys i need your help im running 1980 mustang for money i dont knw if its a V6 or a V8... but I have an type-S and has COLD AIR INTAKE, DC 421 CERAMIC RACING HEADERS, 2" COSTUM PIPING, 2 1/2" 5ZIGEN AXLEBACK, NRG GROUNDING KIT, AND HONDATA REFLASH MY CAR IN FULLY STRIP... WHAT U GUYS THINK? THANKS FOR THE HELP....


wait why the fuck do you have 2 inch custom piping. thats smaller than stock and you obviously have a limited edition RSX-S since you have more than one header (seems like you have 421 of them)

[big18g]

hahaahahaha....and wtf is "fully strip", you mean gutted?

[fatcircles]

hahaahahaha....and wtf is "fully strip", you mean gutted?

lol fully stripped probably means took out rear seats and spare, if that

[asdff]

lol fully stripped probably means took out rear seats and spare, if that
:noes:

[TSimage]

LOL at 80s being the main bodies that 351 are stuffed in..

If he is betting $300.. You're probably gunna get reamed...

[jhay310]

hahaahahaha....and wtf is "fully strip", you mean gutted?

yesss fully strip... no rear seat, no panels,and imma took off the passenger seat...

[TSimage]

yesss fully strip... no rear seat, no panels,and imma took off the passenger seat...

That's called "gutted" not "fully stripped"... :rolleyes:

[limesour67]

Ibtb

[orangekeebler]

LOL at 80s being the main bodies that 351 are stuffed in..

If he is betting $300.. You're probably gunna get reamed...

thats kind of what i was referring to in my other post. :rotfl: like i said im gonna laugh if this mustang just tears him a new ass. especially from a dig. :rotfl:

[big18g]

yesss fully strip... no rear seat, no panels,and imma took off the passenger seat...

why dont you learn how to type coherently and spell at least good enough for us americans to understand what the fuck you say....who knows, with the way you type/speak it might be a race for 30 candy wrappers and you misunderstood they guy:thumbsup:

[TYPEzachS]

hahaha :blah:

[BlackSS]

yesss fully strip... no rear seat, no panels,and imma took off the passenger seat...

Ya, but with all those racing headers you got, you probably weigh more than you did before the "strip"

[jhay310]

That's called "gutted" not "fully stripped"... :rolleyes:

haha thanks bro..

[flyin_gnome]

LOL at 80s being the main bodies that 351 are stuffed in..

If he is betting $300.. You're probably gunna get reamed...

thats exactly what I was thinking... that shit is cheap too. I would bet that the mustang driver takes home 300 bones on this one

[Extra Krispy]

hes got an engine swap, your going to lose.
my friend has a POS looking 79 stang with a 5.0 block that has been bored 30 over and full stroker kit and the works, it looks like shit but will prob run 9's when its done so be careful. stangs esp. fox body style are a lot like civic hatchs you never really know whats in them

[Gotboost98]

+1 post for me

[jhay310]

hes got an engine swap, your going to lose.
my friend has a POS looking 79 stang with a 5.0 block that has been bored 30 over and full stroker kit and the works, it looks like shit but will prob run 9's when its done so be careful. stangs esp. fox body style are a lot like civic hatchs you never really know whats in them

thanks for the info bro.. + rep...

[Extra Krispy]

rep returned :thumbsup:

[TSimage]

hes got an engine swap, your going to lose.
my friend has a POS looking 79 stang with a 5.0 block that has been bored 30 over and full stroker kit and the works, it looks like shit but will prob run 9's when its done so be careful. stangs esp. fox body style are a lot like civic hatchs you never really know whats in them

Your friend isn't running 9s without juice..

[DanB]

Your friend isn't running 9s without juice..

My 90 with a 316 stroker .040 over and the best of everything could run mid 10s. Of course I also had my car down to about #2500. :) I would put his friends car at the high 10s best case.

[TSimage]

My 90 with a 316 stroker .040 over and the best of everything could run mid 10s. Of course I also had my car down to about #2500. :) I would put his friends car at the high 10s best case.

"Could" or "did" 2 different things. ;)

[White_02]

,
I (not "i")
.
I (not "i")
'
a
.
'
o
'
, (not "...")
(no "n")
T (not "t")
it
a
-
-
("racing" not needed as it's not in the name)
(no "s")
custom (not "costum")
-
a
.
s (not "n")
ped
. (not "...")
do
you (not "u")
. (not "...")


What it should read...

Hey guys, I need your help. I'm running a 1980 Mustang for money.

I don't know if it's a V6 or a V8, but I have a Type-S and it has a cold air intake, DC 4-2-1 ceramic header, 2" custom exhaust piping, 2-1/2" 5Zigen axleback, NRG grounding kit, and a Hondata reflash. My car is fully stripped.

What do you guys think?




Learn proper spelling, punctuation, and sentence structure.
Caps lock hurts the readers eyes and tends to steer more people AWAY from reading it.

[big18g]

damn, lol you have too much time on your hands....but you are right: i fucking hate it when lame ass retards like this 16yo jump in and piss me off with all kinds of fucked up writing

[Extra Krispy]

Your friend isn't running 9s without juice..

it was just a rough estimate the car is not done yet, but its a complete build with plans for a twin screw and the car is a fully gutted track car

[SLOWrsx_1969]

You guys are all wrong...There's no way this guy found one of the MILLIONS of ford small blocks lying around, and then one of the MILLIONS 9 inches. And I'm sure no one ever thought of putting the two in the smallest mustang ever. =)

[krystar]

foxbodies are either fucking slow or fucking fast. either u'll creep on him or you won't even see his car on the horizon.

[281cobra]

1980 Ford Mustang (255ci) 119hp,
0-60 - 11.8
1/4 mile - 18.5

I'm sure he's change out the engine by now.

[slo_5oh]

Naah.. Those 80's mustangs are slow. :D

[W1lson]

omg its the mustang invasion

GET TO THE CHOPPA!!! NOW!!! GOO!!!

COME WITH ME IF U WANT TO LIVE.

[Gotboost98]

omg its the mustang invasion

GET TO THE CHOPPA!!! NOW!!! GOO!!!

COME WITH ME IF U WANT TO LIVE.

http://smiliesftw.com/x/fo_shizzle.gif

[slo_5oh]

Me? Mustang invasion? Naah.. Long time lurker. Just too slow at work and decided to join. You guys seem to have quite a large domestic membership here.

[Kevin949]

I'm in on this result.

I used to own a beat ass mustang that looked like shit but could run down alot of cars on the road. I miss that beast.

[orangekeebler]

Me? Mustang invasion? Naah.. Long time lurker. Just too slow at work and decided to join. You guys seem to have quite a large domestic membership here.

:bsflag:

welcome aboard sir...even if you do drive a ford. :D

[slo_5oh]

:bsflag:

welcome aboard sir...even if you do drive a ford. :D

Not too often. Mostly fixing it. Lol. J/K

[orangekeebler]

Not too often. Mostly fixing it. Lol. J/K

:laughing:

a buddy of mine has a nice fox. not the fastest on the block, but its pretty quick.

[Kevin949]

Not too often. Mostly fixing it. Lol. J/K

Don't lie, I know how fox bodies are. ALWAYS needing "attention". LoL :laughing:

[slo_5oh]

My fox requires more attention than my fiancee. And she's jealous of it. Calls it the other woman. However, she knows she'll get launched before the car. It's getting close to being done tho. At least until I split the bottom end and have to build a 347 with a boss block.

[Kevin949]

My fox requires more attention than my fiancee. And she's jealous of it. Calls it the other woman. However, she knows she'll get launched before the car. It's getting close to being done tho. At least until I split the bottom end and have to build a 347 with a boss block.

haha, that's funny cuz my GF says the same damn thing about my RSX. LoL

That'll be a beast setup I'm sure. I'm out of the game with muscle cars, I don't know much about anything with 'em anymore. All I know is what I dealt with on my two fox's. *Sigh* Problem after problem. Mostly electrical though. Hah.

[orangekeebler]

My fox requires more attention than my fiancee. And she's jealous of it. Calls it the other woman. However, she knows she'll get launched before the car. It's getting close to being done tho. At least until I split the bottom end and have to build a 347 with a boss block.

http://www.youtube.com/watch?v=VhnK2_nizqw

this is my buddies..

[slo_5oh]

I want to get a solid tune before I mess with a bottom end. The TwEECer is pretty impressive, but you can change way too many things. On the stock bottom end, I'm hoping for low 11's and will be ok with mid-high 11's on 12-15 lbs of boost.

Orangekeebler, that sounds like where I want to be by the end of next year.

[qwk]

depends on the mods of the mustang. i see those body style mustangs do wheelies 1/4 length down the track everytime i visit the strip. (yes.. they were street cars)

[slo_5oh]

Yep. My car went 1800 miles this year so it really doesn't matter about street manners. Here's a pic of the car before the new rims/top.

http://aycu01.webshots.com/image/21040/2003174441278594225_rs.jpg

[peterr928]

The fact that he's willing to bet 300 on this race means he's either stupid or he's got a 351 in there. those cars are light as hell, and you can find a 351w for dirt cheap since ford put those into a shitload of trucks, boats, and vans since the 60s. Hell he doesn't even need a 351, you can get a 302 HO for just as cheap, those motors are weak stock since they were smogged to shit but just slapping a set of heads and an intake manifold on it will get it some serious power. Good luck trying to find an early 80s fox mustang with the original motor, especially if the guy races. If you hear a lopey idle, drive away and don't waste your money.

I can't wait to get another fox, too bad i live in buffalo and the snow owns RWD V8s...had to sell mine :(
And as far as people saying that they need constant repairs, parts are dirt cheap and it's the easiest to work on car i've ever owned. The only thing that really sucks on them is the trannys, T5s are known to leak and grind, and the AOD is absolutely shit...that's why i went C4 :)

[BlackSS]

OP, Did you race him yet?

[DOHCtor]

OP, Did you race him yet?

:iamwiths:

[big18g]

haha, ill bet 300 bucks he didnt:mam:

[carguy]

Do it on PINKS, so we can watch you LOOSE YOUR RIDE.

[cstrike]

im just laughing someone has a 1980 mustang

[DOHCtor]

im just laughing someone has a 1980 mustang

actually i'm more impressed that someone has it and still running.

[big18g]

its more impressive to restore something old like that and make it nice and quick again, as opposed to just maintaining a new and reliable car like the rsx....:o
props to the mustang guy......

[Gotboost98]

im just laughing someone has a 1980 mustang

foxbody>rsx S

[W1lson]

lies

[Gotboost98]

lies

:bsflag:

[slo_5oh]

im just laughing someone has a 1980 mustang


Exactly. Why would anyone mess with an 80's car. They're slow. I should know. :rotfl:

[JDM_ES1]

So did you win yet?

[SiMS]

If he wins the 300 bucks he can buy himself another 1980 stang or a 2001 Dodge Neon

[orangekeebler]

If he wins the 300 bucks he can buy himself another 1980 stang or a 2001 Dodge Neon

any other 'coming soon' mods you are to be expecting?

and how 'soon' is soon really? ive seen that in your sig for months now.

[98(obra]

In for the results of rsx boy losing $300

[slo_5oh]

Hey jhay310, did you ever race?