PDA

View Full Version : greddy front lip owner! read here........

K20A
02-13-2003, 02:23 PM
does it require tapes when u install the lip?

is it bolt on and clip in? any screws watever require?

thanx much.

pls help.
Supirio
02-13-2003, 05:02 PM
Originally posted by K20A
does it require tapes when u install the lip?

is it bolt on and clip in? any screws watever require?

thanx much.

pls help.

There is no tape with the greddy front lip, only screws and clips hold it in place. (its secure.)
MTO RSX
02-13-2003, 06:07 PM
snaps right in place where the OEM lip does.
K20A
02-13-2003, 07:34 PM
so i don't need to drill any EXTRA holes rite?

no tapes needed?

wow....
GoodKnight
02-13-2003, 11:16 PM
Originally posted by K20A
so i don't need to drill any EXTRA holes rite?

no tapes needed?

wow....

Exactly.
Saint_Bic
02-14-2003, 12:29 AM
u do need to drill one (or two, your choice) tiny holes on each side where the screws go in, it is a sinch tho you could do it bye hand with a screwdriver but i just used a drill with a standard philips head bit on it, very very simple and really secure
K20A
02-14-2003, 01:52 AM
thanx, i just installed one.
pretty easy really.
ktun
02-14-2003, 03:19 AM
Originally posted by K20A
so i don't need to drill any EXTRA holes rite?

no tapes needed?

wow....

Well...you don't have to but I used two extra screws (one for each corner) to keep my lip tight.
Christoph
02-14-2003, 02:42 PM
I would still opt for 3M double sided tape in the middle to secure it more. Maybe it's my fear of theft being in cali, but that is one reason and the fact that there is more secureness distributed through the lip.
GoodKnight
02-14-2003, 03:08 PM
Nah, it's bolted in the center to the bottom of the car, plus it has a few tabs where the stock lip sat. You won't need tape, trust me. Even after I banged it to the point where it cracked, the thing still sits pretty sturdy on the bumper cover.
K20A
02-22-2003, 05:26 AM
shit, bad thing happen.

i'm now installing another greddy lip for my friend.

ok i unscrewed the bolts from the centre bottom,

but the holes right under the centre won't let me bolt on after i put the greddy lip on. i meant it won't tighten back the stock screws.

why is it like that? pls help.
K20A
02-22-2003, 02:58 PM
bump.

pls help again.
pnoiboldstar
02-22-2003, 10:21 PM
Post some pix of your car dude, it sounds phat from the stuff in your sig.
K20A
02-23-2003, 07:00 AM
pls help.
K20A
02-23-2003, 07:01 AM
another one.
i'll post pic of the hole that i meant about..........
hope u guys can help me out.