It's been so long since I've had a rear seat, so I might be doing it all wrong, but does the ITR rear seat use the same mounting hardware as the OEM leathers from a type s? I can't seem to get the brackets to line up properly, and I'm wondering if I'm wasting my time.

Any help is greatly appreciated.

Yeah, they should fit exactly the same.

Are you having trouble with the folding seat backs, or the seat pan part (the long, flat part you sit on)?

Yeah, they should fit exactly the same.

Are you having trouble with the folding seat backs, or the seat pan part (the long, flat part you sit on)?


the folding parts. I can't seem to get the brackets to line up with that little thing in the middle properly. i'm sure i'm doing somethign retarded. I started putting them in the moment that I woke up. So I might not be thinking clearly,.

should line up man ... i did mine a couple of weekends ago ... used the same hardware. good luck.

Like I expected, it was too early for me to be thinking. I just went out again and did it in 5 minutes. Had the brackets reversed which made the seat sit too far away. It's all good now.

Thanks everyone for the posts. I should wait until all the cobwebs are out of my head before attempting anything :p

glad it worked out for ya man :)

frozt = retarded lol

Lance

that's exactly why I never work on the car right out of bed

yeah, i got home from the trip of getting all my stuff at like 4am last night. and I didn't get a chance to install the rear seat, but got most everything else in, so Iw anted to finish it asap, lol. i was excited

I heard it's easy.

What was wrong with your original backseat?

Wasn't foreign enough?

What was wrong with your original backseat?

Wasn't foreign enough?


No tard boy, it didn't match my carbon kevlar bucket seats.

http://iamfrozt.com/images/03rsx/july05/visionside.jpg

Coming from the man with type R floormats. Wasn't it akward ordering the LHD *type r* floor mats?

No tard boy, it didn't match my carbon kevlar bucket seats.

http://iamfrozt.com/images/03rsx/july05/visionside.jpg
wow, those are gorgeous.

Coming from the man with type R floormats. Wasn't it akward ordering the LHD *type r* floor mats?


I dont really know, was it akward when your dad popped his cock into your mouth last night?

wow, those are gorgeous.


Thanks, I've given the car a huge overhaul lately. Will find out monday if/when my seibon mugen hood will be in.

Thanks, I've given the car a huge overhaul lately. Will find out monday if/when my seibon mugen hood will be in.
very nice. can't wait to see it installed :thumbsup:

how much do the seats weigh?

very nice. can't wait to see it installed :thumbsup:

how much do the seats weigh?


10 to 11 lbs, a far cry from the super heavy stockers.

Thanks, I've given the car a huge overhaul lately. Will find out monday if/when my seibon mugen hood will be in.

why a cf hood, what will happen to ur gundam head? hehe

They are actually very comfortable too, if you dont have a problem with sitting properly, as in a straight back. Mo hated them the whole ride back from chicago after picking them up. Bitched about having to sit like a white person, lol, so as you can see in the pic, when I mounted his seat, i mounted it at a lean.

why a cf hood, what will happen to ur gundam head? hehe


That was done under a paint sponsorship for Hot import nights. The car is being built for road race now, and I'm working for another full paint sponsorship. The CF hood will reduce weight and the mugen type was chosen for the placement of the vents which will help to bring cool air to my turbo.

http://iamfrozt.com/images/03rsx/july05/visionrear.jpg

They are actually very comfortable too, if you dont have a problem with sitting properly, as in a straight back. Mo hated them the whole ride back from chicago after picking them up. Bitched about having to sit like a white person, lol, so as you can see in the pic, when I mounted his seat, i mounted it at a lean.
"his seat".. aww lol

10-11 lbs that's just insane. i'd probably have an issue with them too cuz i sit far back in my seat. it's the only way i can reach the pedals without sitting with my boobs resting on the steering wheel, lol.

http://iamfrozt.com/images/03rsx/july05/interior.jpg

http://iamfrozt.com/images/03rsx/july05/interior.jpg
very nice.

what shift knob is that? kinda looks like my HFP one.

"his seat".. aww lol

10-11 lbs that's just insane. i'd probably have an issue with them too cuz i sit far back in my seat. it's the only way i can reach the pedals without sitting with my boobs resting on the steering wheel, lol.


yeah, i didn't install sliders on the passenger seat, only on mine since I'm shorter. Passenger is on floor mount rails without a slider.

very nice.

what shift knob is that? kinda looks like my HFP one.


Thats the OEM anodized RSX knob. I'm getting rid of it in leui of a sparco globe knob whenever I order my sparco harnesses. Since I kinda spur of the moment decided to do the full itr swap, I have to get rid of that, my headunit and my spark plug cover and thats it.

http://iamfrozt.com/images/03rsx/july05/itrsill.jpg

mats are dirty and I haven't had a chance to shampoo them yet.

Thats the OEM anodized RSX knob. I'm getting rid of it in leui of a sparco globe knob whenever I order my sparco harnesses. Since I kinda spur of the moment decided to do the full itr swap, I have to get rid of that, my headunit and my spark plug cover and thats it.
ah yes, same as mine. all honda shit knobs are pretty much the same, haha. mine's the dark silver one though. :)

ah yes, same as mine. all honda shit knobs are pretty much the same, haha. mine's the dark silver one though. :)

yeah, the sparco globe knob is countersunk, so it sits super low, which will be nice. Mo has a black version of it in his ride right now.

yeah, the sparco globe knob is countersunk, so it sits super low, which will be nice. Mo has a black version of it in his ride right now.

nice. hmm, a black shift knob. i should look into getting one of those..

http://sparcousa.com/ptuning_knobs.asp?id=386

I believe mo has the black with perforated leather.

countersunk shift knobs rule
I have the team voodoo, I love it.

countersunk shift knobs rule
I have the team voodoo, I love it.


whats it look like? i've never heard of it.

http://i13.photobucket.com/albums/a278/Turzy/Car/IMGP0290.jpg

I also got it engraved
http://forums.clubrsx.com/attachment.php?attachmentid=187608&stc=1

Not bad, is that a sort of custom one. It kind of appears to have been made on an amateur lathe or something. I'm not knocking it, its nice, just looks like a custom piece.

it's made for the S2000.
Quite a few ppl have it already on crsx.

it's made for the S2000.
Quite a few ppl have it already on crsx.


damn, i've been in the dark I guess. Never seen it or heard of it till just now.

haha
it happens ;)
I was also considering the globe when I was looking for a knob. Went with the Team Voodoo afterall.

Those front seats are amazing. Your car is looking really good...

Those front seats are amazing. Your car is looking really good...


Thanks, I'm trying to pull it all together finally. I've still got over 4k worth of parts sitting in my basement awaiting time for me to get it all installed, not to mention stuff still in the mail.

Frozt i highly recomend the Skunk2 Billet alluminum one.. it sits really low with the honda shift boot adapter, and nice seats! I guess now you can guarentee no one will sit in the back seat anymore since they cant move the front passenger seat! I need that! anyways, with the new railings, how much lower do your seats sit from stock?

im 6'4'' and if i autocross im gonna have to stick my helmet out of the sunroof:(

Frozt i highly recomend the Skunk2 Billet alluminum one.. it sits really low with the honda shift boot adapter, and nice seats! I guess now you can guarentee no one will sit in the back seat anymore since they cant move the front passenger seat! I need that! anyways, with the new railings, how much lower do your seats sit from stock?

im 6'4'' and if i autocross im gonna have to stick my helmet out of the sunroof:(


Actually, I ran without rear seats for the longest time. I had more than 2 people in my car anyways.

I am probably going to go with the sparco globe though, I'm not a big skunk fan, it would either be the sparco or the alex Ti one.