i got an intake manifold for a 05-05 rsx type s any one interested let me know i want two fifty for it

way way way too high junior

You would be lucky to get $75 for it. No one is going to spend that much on a PRB manifold, that is a stock Type-s manifold. You can get an RBC or a PRC (Type-R) manifold for that much or less brand new.

^^^^^
What he said

ha ha ha ha ha ha ha ha ha yea its a manifold no its not stock and it might just give power throught all red line lol

oh ma bad i ment all rpm

oh and u cant get this manifold for anything under two trust and belive i work in a machine shop and i had to do something to this manifold it fits like a charm i already did it to ma buddys and it works wow i wanted to do it to mine but i need dinero lol

you are a chetohead

post a pic then. If it is a PRB manifold, it is a stock manifold on the RSX so why would we pay $250 for a manifold that we already have or one that we can pick up for about $40 in the for sale forums. If this is a PRC manifold, that is the Type-r manifold, it does have some gains, but nothing very drastic and you can pick it up for about $160. If this is a RBC intake manifold then that is the Manifold that comes on the new Civic Si and the Euro Type-r accords. If this is the RBC you can get the RBC new from Honda for $168 new.

u goet it for that price cause u got hook ups and then u take it to the machine shop that i work at we charge seventy or fifty dollars to cut the part that is use less like how well i'm sure u know u put it on u car and u go faster try to take it to any machine shop and tell them ok cut and grind without fucking it up and they will charge alot ma friend paid ma dad to do it he paid ninty five i'm his son so i paid sixty only cause of time and grinder pads it eats that up


and duh i'm a chetohead thats ma name dont wear it out

u goet it for that price cause u got hook ups and then u take it to the machine shop that i work at we charge seventy or fifty dollars to cut the part that is use less like how well i'm sure u know u put it on u car and u go faster try to take it to any machine shop and tell them ok cut and grind without fucking it up and they will charge alot ma friend paid ma dad to do it he paid ninty five i'm his son so i paid sixty only cause of time and grinder pads it eats that up


and duh i'm a chetohead thats ma name dont wear it out

dude what? It doesnt take a rocket scientist to know how to use a bandsaw and cut that shit off. Its a straight fuckin line! Learn how to spell so people can understand half the shit you say and lower price a shit load as well. I just bought the RBC manifold for 150 brand new. Start around there and see what offers your get.

If you were stupid enough to pay nearly 100 bucks to have someone cut and deburr your IM, your a god damn retard and im disgusted just thinking about me and you breathing the same air.

you have pm.

ha ha a strait line go cut one and find out u got to keep going back and forth to make sure that u dont cut to much off then u got to take the grinder to it if u dont cut enough and me personaly i like all ma shit to look clean ass fuck this manifold has no errors to it if u want it coo if not dang quit riding ma ass i'm selling it with the hondata gasket anywhays so y u trripin plus it comes with the throttle body spacer u need plus i already sold it plus i'm lame plus this is not the time to bitch place either u buy it or dont post up

lol thats a nice one though about the same air lol ha ha ha i can always stop to appretiate a good insult hey and pluss i cant find no where around here to sell me that manifold for that price and look at all the shit i threw in with it dumb nut next time try asking questions instead off looking like u dumb ass

and plus ill spell what ever the hel i wana wong u no ma teasher... lol

i got the adapter free. And dont talk to me like im new at cutting metal. Im certified in CNC CAD/CAM Programming so next time you wanna mention that "grinder pads" are expensive, you might wanna check to make sure everyone your talking to has an IQ above that of a toad. If by "grinder pads" you mean those which go on a belt sander, they're about 5 bucks a pop for GOOD ones and they last FOREVER. Grinding cast aluminum would be like grinding away at butter. If by "grinding pads" you mean the wheels for an air grinder, you can get a box of 25 for under 15 bucks. And one of those 25 pads would be enough to grind a hole through your precious intake manifold. For a precut IM with adapter plate and USED gasket, aim for 175.

hey well just to let u know i got the same certificates you toad and ok if i wanted to grind through the whole shit like a wreackless flinstone i would have got the good ones but i didnt that shit ate them up but it left it nice u wank plus i sold it already and the guy liked it so u can get the addapter for free ok smart guy are u gonna hook every one else up with one for free cause i dought they can get it for free so yea oh that must also mean that u can get the hondata gasket for free to huh so ok mr free how bout u get us all one that way we dont pay for it

Diffently Bogus. Grinder pads for aluminum are cheep, you dont spend more then 10 on a pad to do a small piece like that, And if it was your dad that did it why wouldent he just make u buy the pad and do it for free? Mabye he knows ur a moron and would pay that much? Doubt u even had it.

Chetohead, you're seriously lacking in information. First, is it a factory intake manifold or aftermarket? Yes, we know it's cut.

I'm going to take a wild guess that it's either a RRB or RBC IM. To get that to fit on an 02-06 RSX head, you'll have to grind. And what is that "spacer" you're talking about? Karcepts and ETDRacing/K-Tuned have a throttle body to IM adapter. It'll be etched on the adapter. Although it does move the TB further away, I wouldn't consider it as much a spacer as the RSX TB's bolt holes don't line up with the RBC IM normally. It's an adapter.

Also aluminum is pretty soft and Karcept's site has instructions on how to cut the water port section off the intake manifold. I bought an electric grinder that costs less than the grinding/cutting price you stated and I can grind as many things as I want until the disc is toast.

If you're going to make a sale, know what you're selling. Most of these people can visually identify which intake manifold you own and knows how it ranks compared to others.

If on the other end of the adapter is a throttle body with sensors, I'm interested.

nice u got it dead on rbc with the spacer cause like u said u right it does move the throttle body but not only that it angles it and if i member correctly on screw was not going in i orderd the spacer from ma friends cousins shop its called r-crew u can check them out if u want i got a guy coming over in like two hours to look at the manifold i actually want less now cause u right who gonna pay that much ma bad

plus rep for mexinatteeee aparrently i can't because i already did haha sorry mex

Someone PLEASE by this so that he can pay for his remedial English classes...

ha ha ha ha ha ha just use to texting u guys lol fuck lay off i'm not making an essay or writing something for a job ok dang and i sold it already

holy shit. Please take 6th grade English all over again. :ugh: Idiot.

:deadhorse i wish u were the horse

i wish you werent such a chetohead

dont buy from this guy he is a fucking scammer

but that sucks cause i am why u guys hatting on me i'm just trying to get rid off something i dont want what is the big deal if it is to high then fuck it what ever i dont post on nothing i know i dont want or i know is to high why u hatting lol

dang

what?

http://svana.org/sjh/images/various/knuth_don_has_a_grammar.jpg

nice u got it dead on rbc with the spacer cause like u said u right it does move the throttle body but not only that it angles it and if i member correctly on screw was not going in i orderd the spacer from ma friends cousins shop its called r-crew u can check them out if u want i got a guy coming over in like two hours to look at the manifold i actually want less now cause u right who gonna pay that much ma bad

This is called RUN-ON sentence. Make sure you know what run on sentence is, or you will FAIL English test.!!!lol

hes from canada he doesent speak english very well he speaks french so lay off with the grammer cut downs

damn man if u want ur intake manifold sold then post some damn pics, no one cares about it untill they see some pics and no one in their right mind is gunna pay 200+ for an oem manifold which is supposedably modded.. post some pics man, and stop the bullshit....



ps- i call this thread bullshit!

Guys, I can understand you lookin out for one another and trust me I would not be caught dead buying this IM even with your money, but the guy is just trying to make some money. Yes he does sound like a moron, but just let him do his thing. Anyways, he said he already sold it.