yea just wondering who or where can i go to get that shit installed without being ass raped. just changed the oil yesterday at my friends house i was gonna attempt to install while i had the car in the air (lifted by a 14" jack) , well i tried to loosen the cat heat shield bolts and they wasnt moving, at the same time it reminded me how much of a pain in the ass it was to remove the stock cat back. it took like 200lbs of force on vise grips to remove the bolts around the cat. the muffler bolts wernt too nice either. then im debating if i should go on ahead and try to find a descently priced 20" jack and try to attack job with better space.

imod..

www.i-modify.com

pm'd

imod..

www.i-modify.com

hmmmmm not to bad but if they max both the inserts and header then it'll be $210
i dunno if im feelin that

ryan lol jaded'05

stylesp did mine and I have no complaints. I'm sure he will give you a good price

hmmmmm not to bad but if they max both the inserts and header then it'll be $210
i dunno if im feelin that

then do the inserts yourself, they're so easy it's not even funny.

ps use jack stands

stylesp did mine and I have no complaints. I'm sure he will give you a good price

:thumbsup::thumbsup:

pay sean in high fives! or manual labor! =P

lol i pmd my price to him very reasonable

yea just wondering who or where can i go to get that shit installed without being ass raped. just changed the oil yesterday at my friends house i was gonna attempt to install while i had the car in the air (lifted by a 14" jack) , well i tried to loosen the cat heat shield bolts and they wasnt moving, at the same time it reminded me how much of a pain in the ass it was to remove the stock cat back. it took like 200lbs of force on vise grips to remove the bolts around the cat. the muffler bolts wernt too nice either. then im debating if i should go on ahead and try to find a descently priced 20" jack and try to attack job with better space.

dude i talked to my co worker that will help me do ur work and he said yes, but i gotta ask my supervisor to c if its okay. he comes in only on fridays b.c. he works at a another location...if he says yes i can do it for u for $100.

ive done this b4, u can just do it urself! hardest part is getting the cat bolts off

ive done this b4, u can just do it urself! hardest part is getting the cat bolts off

LOL AMEN TO THAT! sean, remember my cat bolts when we had to take my WHOLE exhaust and header out? or was that matt?

Just I-mod for peace of mind plz

ive done this b4, u can just do it urself! hardest part is getting the cat bolts off yea those nuts is what i was talkin about when i installed my cat back it took like 200LBS or more of force to turn those damn things using vise grips clamped at 100lbs lol. now i dunno if the actual bolts were suppose come cuz i hammerd 1 and it look like it wasnt moving so i was like fuck it i use the new nuts supplied wit the kit to go over them old bolts.

dude i talked to my co worker that will help me do ur work and he said yes, but i gotta ask my supervisor to c if its okay. he comes in only on fridays b.c. he works at a another location...if he says yes i can do it for u for $100.
ok

lol i pmd my price to him very reasonable

yea pretty resonable :thumbsup: n i will let 1 of ya know watsup i gotta see what my check look like and calculate bills:coffee:. im also thinking of trying to get an new inner fender liner for the driver side cuz i shreded it:shady:. long story for that and todays snow kinda motivated me to go out and buy 1 cuz i dont want the salt and shit gettin on my filter. i probly gotta get a header gasket too i hope i dont have to replace the o2 (115,000mi)

Just I-mod for peace of mind plz

lol i guess i'll call them to see if they can make a deal

yea call dennis(I-MOD) he is a real cool guy and will take care of u...but really most teh stuff inst that hard 2 do urself

do it yourself man. I did mine alone under my car for about 3.5 hours with a lot of wd-40 and mansweat.

Buying a torch from walmart is a easy $14 solution for rusty bolts.

imod did my bcrh +esmm + em2 sway for $120

PB Blaster

Damn that IMOD thing is expensive... But I guess not everyone in the world is mechanically inclined. BTW, you don't need a new exhaust manifold gasket, the stock one is metal and can be reused. Just clean it off.

intense motorsports in catonsville, md
(410) 788-7118

ask for bartee, tell him khoi sent you

imod did my bcrh +esmm + em2 sway for $120

Damn that IMOD thing is expensive... But I guess not everyone in the world is mechanically inclined. BTW, you don't need a new exhaust manifold gasket, the stock one is metal and can be reused. Just clean it off.

wow thats not bad. well i have 115,000 do ya think i need to replace the o2s:noes:. well i just brought a jack 19"+ and a o2 sensor socket i guess i'll go on ahead and try to attack the bolts and shit

pb blaster works wonders :)

wow thats not bad. well i have 115,000 do ya think i need to replace the o2s:noes:. well i just brought a jack 19"+ and a o2 sensor socket i guess i'll go on ahead and try to attack the bolts and shit

just do it urself dude its not that hard. go to a shop and see if they can atleast loosen the tough bolts for u then u can finish the job.

just do it urself dude its not that hard. go to a shop and see if they can atleast loosen the tough bolts for u then u can finish the job.

i guess i'll breaker bar that ho

yea those nuts is what i was talkin about

Deez nuts?

Deez nuts?

lololol

Most of the time on those bolts you have to use a bolt extractor to get them off. It's easier when you can get the car up higher to get a longer wrench on it to. Shoot me a PM if you need more help getting them off. :thumbsup:

D.

Most of the time on those bolts you have to use a bolt extractor to get them off. It's easier when you can get the car up higher to get a longer wrench on it to. Shoot me a PM if you need more help getting them off. :thumbsup:

D.

ok cool :thumbsup:

wow thats not bad. well i have 115,000 do ya think i need to replace the o2s:noes:. well i just brought a jack 19"+ and a o2 sensor socket i guess i'll go on ahead and try to attack the bolts and shit

get a can of pb blaster and soak every bolt heavily. :P good luck :thumbsup:

ok cool :thumbsup:

lololz ur willing to drive from dc to northern va to do a simple job. when ur car is done i wanna c ur car bish.

not everyone is a mechanical genius, or even a noob at it. jus cuz he doesnt want to risk anything or cuz he doesnt have the knowledge or tools or what ever the case doesnt mean he cant just take it to someone

not everyone is a mechanical genius, or even a noob at it. jus cuz he doesnt want to risk anything or cuz he doesnt have the knowledge or tools or what ever the case doesnt mean he cant just take it to someone

dude i kno him and he is a mechanical genius. he went to lincoln tech for gods sake. :shakehead

wait wait TS did?

^yes. :rotfl:

well i didnt know that....and i feel kinda dumb....+rep for admittin my idiocy?

yea man np. if a person wasnt mechanically inclined i wouldnt be mean about it. TS is just lazy 2 do his own work or really cant do it, who knows. +rep back for npb crew. lolz:thumbsup:

yea man np. if a person wasnt mechanically inclined i wouldnt be mean about it. TS is just lazy 2 do his own work or really cant do it, who knows. +rep back for npb crew. lolz:thumbsup:

hey watever man my ass got busted installin the cat-back wit 12" of clearance it wasnt the install it was taking the bitch apart. and everyone doesnt have access to a lift in a shop like you do. i guess the install would be easy being able to lift the motherfucker 6ft in the damn air with the availability of air ratchets,drills and other shit to make the job easier. did u install ur exhaust under 12'' by hand? :rolleyes::stfu:

hey watever man my ass got busted installin the cat-back wit 12" of clearance it wasnt the install it was taking the bitch apart. and everyone doesnt have access to a lift in a shop like you do. i guess the install would be easy being able to lift the motherfucker 6ft in the damn air with the availability of air ratchets,drills and other shit to make the job easier. did u install ur exhaust under 12'' by hand? :rolleyes::stfu:

whats up zepplin! :wavey: is ur car done? u didnt have much clearence bc ur big ass is as big as the clearence lollol jk jk.