Ok, so I had an issue with SRS the light being on and couldn't find exact info anywhere. After finding it all from multiple places, I thought I'd compile it into a single post to help others out.
1st:: Try to reset your light, it may take 3-4 tries or more if your timing is off.
KSMatic - DIY: Reset SRS Light
IF Your light blinks 2x and comes right back on, here's how to pull the codes.
Step 1: Make sure the key is not in the ignition and then get a paperclip and fold it into a U shape
Step 2: Plug it into ODBII Service Port 4 and Port 9
(above images courtesy of k-series.com)
Step 3: Insert key and turn the ignition to Position II
Step 4: Watch the SRS and write down the codes. It will stay on for 6 seconds, then go off and the codes will then follow.
HOW TO READ CODES
SRS Codes consist of a main code, and a sub-code.
EXAMPLE: 21-1:: 21 is the main code, 1 is the subcode
Here are all the possible codes
Here's a video of codes I was getting so that you can get an idea of how to read them better. I had three codes in this video.
VIDEO
http://video.google.com/videoplay?docid=1027090455763232641
CODES
15-1:: Faulty OPDS unit or OPDS unit not initialized
22-1:: Open or increased resistance in passenger's seat belt buckle tensioner
12-1:: Open or increased resistance in front passenger's side airbag inflator
1st:: Try to reset your light, it may take 3-4 tries or more if your timing is off.
KSMatic - DIY: Reset SRS Light
IF Your light blinks 2x and comes right back on, here's how to pull the codes.
Step 1: Make sure the key is not in the ignition and then get a paperclip and fold it into a U shape
Step 2: Plug it into ODBII Service Port 4 and Port 9
(above images courtesy of k-series.com)
Step 3: Insert key and turn the ignition to Position II
Step 4: Watch the SRS and write down the codes. It will stay on for 6 seconds, then go off and the codes will then follow.
HOW TO READ CODES
SRS Codes consist of a main code, and a sub-code.
EXAMPLE: 21-1:: 21 is the main code, 1 is the subcode
Here are all the possible codes
Here's a video of codes I was getting so that you can get an idea of how to read them better. I had three codes in this video.
VIDEO
http://video.google.com/videoplay?docid=1027090455763232641
CODES
15-1:: Faulty OPDS unit or OPDS unit not initialized
22-1:: Open or increased resistance in passenger's seat belt buckle tensioner
12-1:: Open or increased resistance in front passenger's side airbag inflator