k24a2/k20z3 build

[remember]

thanks..appericate it.. gonna see the car tomorrow and drop off the a2 pump and then try it out and see what happens..but i mean..any other input lmk..I think i might be the first one to try out this build..?!

other then that i will check with you guys tomorrow and thengo from there..but in mean time..shower power time then back to the bar for work cause its UFC NIGHT ! ugh!

[remember]

Erik loza and strate loss.. need your input and what not..after new oil pump etc etc..we gonna do comperssion test again on the block to see whats up.. if it works..but still causes knock..what else could cause issue?! i asked around to a couple of honda heads..and they were saying usually a rod knock or could be bearings... lmk your input..thank you very much for responding back and help out..

trust me i havent had my car since xmas day...so it will be 3 months of no car..but thank god I live like 1.5 from work..so its easy... and plus right now in cali..gas BLOWS~!

all help is welcomed.

[KSMatic]

the motor has a spun bearing, theres no more narrowing down. Basically, the person who sold you the k20z3 bottom block didn't know that it had a spun rod bearing. I took it out and saw the problem child. I do have an extra k20a3 motor sitting in my garage.. hah.

I'll check out some junk yards for you tomorrow to see how much for a complete k20a2 motor would cost. We can take the block and have them machine the crank and you can resell the block. The oil pump wasn't the issue, it seems like it as we were believing in people selling legitimate parts.

Take this as a lesson, don't buy blocks unless you for sure know its legit. When you told me, "this guy was originally going to swap it but didn't." raises a red flag saying, where did he get the motor and why was it only the bottom block and wheres the head, oil pump, pan and etc.

[remember]

Yaya..i know ugh..time to look for k20a2 short block or z1... well keep you up to date guys..thanks kevin

[remember]

long up to date..but everything will be done within a week from now.. and let you know final results ;X

[KazeSpec]

do you need the pistons still?

[remember]

yeah i told you ..QQ

[1503soldier]

hit up bigworm87 on here hes a k motor beast

[texm3x]

i have a k20z3 fully rebuilt with oem parts and reconditioned block fs..new rings, bearings, and honed to spec..pm me if interested?

[remember]

hopefully no more laggin...

[KazeSpec]

hurry up and buy my pistons

[remember]

for old thread or is it? Car is complete

[Kenchinito]

where are your photos and videos!?

[remember]

i got pictures and some videos...ill post in a bit.. let you see end result..right now just getting lil things done on the ext done..then back to motor.. other then that..she is good.

[FutureITR]

Have you gotten k-pro yet? I advise you to have someone check out your motor next time you buy a block. Or else you'll dump more money into it. Thank god I had KSMatic take care of all my issues. Interesting build since your z3 block will turn into a K20a2 once the oil pump is in.

[remember]

I actually switched it out..its a k24a2 with k20a2 bottom,..i need to get kpoo again get it tuned..i feel the lagg and lil skips ;/ ehh getting tonwhat i want..but right worrying about the outside (rims/paint)

[FG2Chase]

How did it workout? Im working on building that same motor.