Acura RSX, ILX and Honda EP3 Forum banner

Acura Integra Parts

6K views 22 replies 9 participants last post by  SoloTeg 
#1 ·
#7 ·
any ideas of parts needing to be added from our current list of manufacturers please PM or email me @ brian@clubrsx.com

or post in here
 
#11 ·
#15 ·
i've heard that if worst comes to worst, it can be welded back together, but i've never tried metal work on a subframe, especially with how structural it is. in the picture, it looks to have the bracket with the three holes, and it's the same type of thing that's on mine. and i've tested it thoroughly and checked several times to see if the stress is still too much, but on mine, the only thing you really notice are the lower control arms. there's no brace to see and i was really happy about that. progress is a damn good company, and if they back it up, i'd say give it a shot. sway bar makes a hell of a difference on these little cars.
 
#18 ·
would you be able to get Integra fender liners?
 
#21 ·
wondering if you guys got my email? I emailed on Saturday
 
#22 ·
yes i did i was at the dyno most of yesterday i will get back to you today
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top