Acura RSX, ILX and Honda EP3 Forum banner

Back to CRSX! *pics*

Tags
back crsx pics
18K views 55 replies 24 participants last post by  torianosd 
#1 · (Edited)
Hey guys... I haven't been on here since 2009! :O Well back then I was just a 19yr old kid with hopes and dreams of getting an RSX that summer and selling my 2001 Eclipse lol Alot has changed since then. I ended up keeping the eclipse because on a college student budget I just couldn't afford a DC5 at that time. Last January I was leaving school when I was hit by an F-150... the eclipse was totaled. When looking for a new car I found two DC5's I really liked and one 07 civic Si sedan. Unfortunately (or maybe luckily) the dealers had sold the cars just before I arrived. I finally found a 2001 Integra GS-R that was un-molested and in stock form! I picked it up, paid cash and drove her home in March. I started modding in June and since then here is my progress... hope you guys enjoy. :thumbsup:

All stock



and now...











UPDATED Mod List 6/2014

Engine:
-Skunk2 intake manifold
-Skunk2 70mm throttle body
-AEM V2 intake
-Supertech valvetrain
-Supertech flat faced valves
-Toda spec B cams
-Buddyclub cam gears
-Gates Racing timing belt
-ARP head studs
-Comptech USA header
-Apex-i N1 cat-back
-AEM 320 fuel pump
-Marshall fuel pressure gauge
-Password JDM Carbon Fiber spark plug wire cover
-Moddiction Burnt Titanium hardware (engine bay)
-Buddy club Oil cap (Black)
-Spoon Resivoir Socks

Engine Management:
-Hondata S100

Suspension:
-Skunk2 Pro S 2 Coilovers
-Password JDM 3 point front strut bar
-BWR Subframe brace
-BWR LCA's
-Bennen C-pillar bar

Drivetrain:

-Clutchmasters FX200 Clutch
-Competition Clutch 12lb Flywheel
-Energy Suspension shifter bushings

Exterior:
-Top1 motorsports license plate tilt
-Bayson R USDM ITR replica front lip
-OEM ITR spoiler
-Paint matched side skirts
-Clear Corners
-Bi-Xenon retrofitted headligts (Infinity FX35 projector)
-DDM 6000k D2S bulbs
-DDM 35w ballast

Interior:
-Blox 490 spherical shift knob
-Nardi Deep Corn 350mm
-Sony DSX 210X Head unit
-Rockford Fosgate speakers (6.5" Components front 6.5" 2-way rear)
-Polk DXi 10" subwofer
-Hi fonics amps (1000watts and 400watts)
-Prosport amber gauges (Oil pressure and Oil temp)
-Custom gauge bezel

Wheels & Tires:
-Enkei RPF1 (16x7 +43)
-Federal 595 (205/45/16)

Brakes:
-Brembo rotors
-Hawk HPS pads

June 2014
 
See less See more
11
#46 · (Edited)
Went to get tuned at Raceline this past week. I've been pretty quiet about my setup until now, but I guess it's time to say, the reason for the head rebuild was because I came across some Toda Spec B cams. Elton did an amazing job tuning the car. As soon as he drove the car on the lift he knew timing was off and adjusted it within a few minutes. The bottom end remained stock and has about 150k miles on it, and the rings aren't the best. But I managed to put down 170whp and 126tq on their dyno (dynojet). I was very impressed with the results but there's still more power to be made. The C.A.R.B. legal comptech header and apex-I N1 catback is holding me back. Going with a full 2.5" setup, and 3" cold air and then I'll see some good gains. Student budget FTL. Definitely looking forward to the retune. Pics from the dyno day and a small photoshoot I had below.













 
#53 ·
Thread update

Engine:
-Skunk2 Intake Manifold
-Skunk2 Alpha 70mm Throttle Body
-AEM V2 Cold Air Intake
-Supertech Dual Valve Springs
-Supertech Titanium Retainers
-Supertech Flat Faced Valves
-Supertech Bronze Valve Guides
-Supertech Valve Stem Seals
-Toda Spec B Cams
-Buddyclub Cam Gears
-Gates Racing Timing Belt
-ARP Head Studs
-Comptech USA Header
-Apex-i N1 Cat-back
-AEM 320 Fuel Pump
-Marshall Fuel Pressure Gauge
-Password JDM Carbon Fiber Spark Plug Wire Cover
-Moddiction Burnt Titanium Hardware (Engine Bay)
-Downstar V1 Beauty Washer/ Bolts
-Buddy Club Oil Cap (Black)
-Spoon Resivoir Socks

Engine Management:
-Hondata S100 (Tuned by Elton @ Raceline USA)

Suspension:
-Skunk2 Pro S 2 Coilovers
-Password JDM 3 Point Front Strut Bar
-BWR Subframe Brace
-BWR LCA's
-Energy Suspension Sway Bar Bushings
-Bennen C-pillar Bar


Drivetrain:

-Clutch Masters FX200 Clutch
-Competition Clutch 12lb Flywheel
-Energy Suspension Shifter Bushings
-Honda OEM Manual Transmission Fluid

Exterior:
-Top1 Motorsports License Plate Tilt
-Top1 Front Splitter
-Bayson R USDM ITR Replica Front Lip
-Honda OEM ITR Spoiler
-Limited Edition Honda-Outfit Carbon Fiber Gurney Flap
-Honda OEM Mud Flaps
-Paint Matched Side Skirts
-Bi-Xenon Retrofitted Headlights (Infinity FX35 Projector)
-Clear Corners
-DDM 6000k D2S Bulbs
-DDM 35w Ballast
-DDM LED Switchbacks
-DDM LED Rear Licence Plate Lights

Interior:
-350mm Nardi Deep Corn Steering Wheel (Suede)
-NRG Steering Wheel Tilt
-Blox 490 Spherical Shift Knob (NeoChrome)
-Sony DSX 210X Head Unit
-Rockford Fosgate Speakers (6.5" Components front 6.5" 2-way rear)
-Polk DXi 10" Subwofer
-Hi-fonics Amps (1000watts and 400watts)
-Prosport Amber Gauges (Oil Pressure and Oil Temp)
-Custom Gauge Bezel
-LED Map and Dome lights
-DDM Wedge LED's (Gauge Cluster)

Wheels & Tires:
-Enkei RPF1 (16x7 +43)
-Federal 595 (205/45/16)
-Blox Extended Wheel Studs
-Project Kics 10mm Wheel Spacers (front & rear)

Brakes:
-Brembo Blank Rotors
-Hawk HPS Pads (front & rear)

















 
#54 ·
Been a while. New update.








Updated Mods List

Engine:
-Skunk2 intake manifold
-Skunk2 70mm throttle body
-Go-autoworks 3" cold air intake
-Supertech valvetrain
-Supertech flat faced valves
-Toda spec B cams
-Buddyclub cam gears
-Gates Racing timing belt
-ARP head studs
-Comptech USA header
-Custom 2.5" Vibrant exhaust
-AEM 320 fuel pump
-Marshall fuel pressure gauge
-Circuit hero spark plug wire cover
-Downstar V1 hardware
-JDM ITR oil cap
-Spoon Resivoir Socks

Engine Management:
-Hondata S100

Suspension:
-Skunk2 Pro S 2 Coilovers
-Password JDM 3 point front strut bar
-ASR Subframe brace
-ASR 24mm rear sway bar
-Function 7 LCA's
-Bennen C-pillar bar

Drivetrain:
-Clutchmasters FX2000
-Competition Clutch 12lb Flywheel
-Dimes shifter bushings
-K-tuned Pro Shifter

Exterior:
-Checkered Sportss license plate tilt
-Bayson R USDM ITR replica front lip
-Paint matched side skirts
-ITR spoiler
-Carbon fiber gurney flap
-Optional mud guards
-Bi-Xenon retrofitted headligts (Infinity FX35 projector)
-DDM 6000k D2S bulbs
-DDM 35w ballast
-Clear corners w/ LED switchbacks

Interior:
-Blox 490 spherical shift knob
-Kenwood DDX372BT Double Din
-Rockford Fosgate speakers (6.5" Components front 6.5" 2-way rear)
-Polk DXi 10" subwofer
-Hi fonics amps (1000watts and 400watts)
-Prosport amber gauges (Oil pressure and Oil temp)
-Custom gauge bezel
-USDM ITR gauge cluster
-ITR faux carbon climate control
-ITR faux carbon ashtray/lighter
-ITR faux carbon cup holder
-UKDM ITR serial badge
-350mm suede Nardi Torino (blue stitch)
-Custom retrofitted Evo 8 Recaro seats

Wheels & Tires:
-Rays Gram Lights 57DR Mag Blue (15x8 +35)
-Toyo R1R (225/45/15)
-Tredwear "Toyo Proxes" tire letters

Brakes:
-Brembo rotors
-Hawk HPS pads
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top