FS: Megan, Autometer, TiAL

Mini-Odyssey05 · 03-04-2010, 02:45 AM

What's up guys? Just got some misc. parts from back when i was doing my turbo install. Gettin low in the bank so no more procrastination on selling this stuff

Any questions, feel free to PM or email me at dl2unknmunkie@yahoo.com, preferably email because i don't have a very large Inbox

Brand New 3" Universal Megan N1 Muffler w/ Silencer

Ideal use for those going boost! Wanted to use it for my custom 3" exhaust, but the EP3's rear was too short to properly fit it (it was so close too!). So it's never been used, only taken out for fitment. It'd def. fit on an RSX or an FG2. Ask if you would like me to measure the length of the muffler.

Asking for 90 SHIPPED!

================================================== =

TiAL 38mm Wastegate (Polished) w/ 7lb spring

Came with the revhard kit i bought. I had the wastegate on for about a month.
Long story short:

- I had an exhaust leak for about a month that i couldnt figure out
- Realized there was air coming from the wastegate and i had a cracked gasket.
- Replaced the gasket... then the leak got even worse...
- So I eventually ordered a new w/g so i wouldnt have any downtime when i took this one off to figure out what was wrong with it.
- Turns out, it was only missing a valve seat (metal ring that sits between where the wastegate meets the manifold)

So all you need is a valve seat and you'll be golden!

Asking for 150 SHIPPED!!!

You can see from the diagram on the left where the valve seat is located (very bottom)

================================================== =

Brand New Autometer EGT Gauge

Bought it new, never got around to installing it and right now i need moneyz more than the gauge. Got it for 140 (these bishes are expensive!).

If you can find it new for cheaper somwhere else, show me and i'll lower it from there

Asking 120 SHIPPED!

Outside the yellow box:

Well, thank you guys for looking! Please don't hesitate to PM or email me any questions.

-Gary

Mini-Odyssey05 · 03-05-2010, 07:08 PM

bump!

Mini-Odyssey05 · 03-08-2010, 04:17 PM

Ttt!

Mini-Odyssey05 · 03-12-2010, 09:05 PM

buuump

srt42004n · 03-12-2010, 10:29 PM

nice deals.

Mini-Odyssey05 · 03-14-2010, 10:33 PM

sank kew

Mini-Odyssey05 · 03-17-2010, 08:54 PM

Mini-Odyssey05 · 04-01-2010, 02:15 AM

Ttt!

03-04-2010, 02:45 AM	#1
Mini-Odyssey05 Team Sun*Works Join Date: Sep 2005 Location: Sunrise, FL Posts: 64 iTrader: (2)	FS: Megan, Autometer, TiAL What's up guys? Just got some misc. parts from back when i was doing my turbo install. Gettin low in the bank so no more procrastination on selling this stuff Any questions, feel free to PM or email me at dl2unknmunkie@yahoo.com, preferably email because i don't have a very large Inbox Brand New 3" Universal Megan N1 Muffler w/ Silencer Ideal use for those going boost! Wanted to use it for my custom 3" exhaust, but the EP3's rear was too short to properly fit it (it was so close too!). So it's never been used, only taken out for fitment. It'd def. fit on an RSX or an FG2. Ask if you would like me to measure the length of the muffler. Asking for 90 SHIPPED! ================================================== = TiAL 38mm Wastegate (Polished) w/ 7lb spring Came with the revhard kit i bought. I had the wastegate on for about a month. Long story short: - I had an exhaust leak for about a month that i couldnt figure out - Realized there was air coming from the wastegate and i had a cracked gasket. - Replaced the gasket... then the leak got even worse... - So I eventually ordered a new w/g so i wouldnt have any downtime when i took this one off to figure out what was wrong with it. - Turns out, it was only missing a valve seat (metal ring that sits between where the wastegate meets the manifold) So all you need is a valve seat and you'll be golden! Asking for 150 SHIPPED!!! You can see from the diagram on the left where the valve seat is located (very bottom) ================================================== = Brand New Autometer EGT Gauge Bought it new, never got around to installing it and right now i need moneyz more than the gauge. Got it for 140 (these bishes are expensive!). If you can find it new for cheaper somwhere else, show me and i'll lower it from there Asking 120 SHIPPED! Outside the yellow box: Well, thank you guys for looking! Please don't hesitate to PM or email me any questions. -Gary Last edited by Mini-Odyssey05; 03-04-2010 at 11:51 AM.

03-12-2010, 10:29 PM	#5
srt42004n IM BACKKK '10 Join Date: Apr 2008 Location: Pennsyl-tucky Posts: 11,492 iTrader: (63)	nice deals. __________________ 2002 NBP partout- Price lowered on everything but kpro check it out!!

04-01-2010, 02:15 AM	#8
Mini-Odyssey05 Team Sun*Works Join Date: Sep 2005 Location: Sunrise, FL Posts: 64 iTrader: (2)	Ttt! __________________ *Boosted* *Milano Red HFP* EP3 SUNWORKS l SUMDON'T**

03-05-2010, 07:08 PM	#2
Mini-Odyssey05 Team Sun*Works Join Date: Sep 2005 Location: Sunrise, FL Posts: 64 iTrader: (2)	bump!

03-08-2010, 04:17 PM	#3
Mini-Odyssey05 Team Sun*Works Join Date: Sep 2005 Location: Sunrise, FL Posts: 64 iTrader: (2)	Ttt!

03-12-2010, 09:05 PM	#4
Mini-Odyssey05 Team Sun*Works Join Date: Sep 2005 Location: Sunrise, FL Posts: 64 iTrader: (2)	buuump

03-14-2010, 10:33 PM	#6
Mini-Odyssey05 Team Sun*Works Join Date: Sep 2005 Location: Sunrise, FL Posts: 64 iTrader: (2)	sank kew

03-17-2010, 08:54 PM	#7
Mini-Odyssey05 Team Sun*Works Join Date: Sep 2005 Location: Sunrise, FL Posts: 64 iTrader: (2)