|02-09-2017, 09:42 PM||#1|
Join Date: Feb 2017
JRSC Belt help k20/k24
Current set up:
Stock auto tensioner
48.5" 6 rib belt (getting alot of belt squeal and belt hop)
I'm having a hard time finding a 7 rib belt in the same size. Been pulling my hair out looking for similar set ups so i can determine if the belt size i'm using is too small or too big.
If anyone has any experience with a similar set up and could direct me toward a belt length i should be using i would greatly appreciate it!
|06-24-2017, 05:43 PM||#2|
Join Date: Sep 2003
Location: Los Angeles
you can also get a 8-rib belt and cut off 1 rib if you find the correct size.
|07-28-2017, 06:49 AM||#3|
Always on TDY...
Per last post in link, this was resolved /thread
2002 NHBP RSX-S | K-Pro v3 | 2006 K24a2 | JRSC (K24a2 CP + 3" BP) | MercRacing Inlet
FIC 775cc | AEM W/M (1000cc/min) | 3" Custom SRI | OBX v1 RH | 2.5" Custom Catback
nats007's DC5 progression
|belt , jrsc , k20 or k24|