Vtec Killer turbo a3 vtc phase gap P0341 code after cam change - Club RSX Message Board
Go Back   Club RSX Message Board > PERFORMANCE BASICS RSX > Bolt-On Basics: RSX (Base)
Use the same user name on Club RSX, Club EP3, and Club ILX!

Reply
 
Thread Tools
Old 04-27-2019, 08:21 PM   #1
DKintegra
New Member
 
Join Date: Apr 2019
Location: Canada
Posts: 1
iTrader: (0)
DKintegra is a jewel in the rough of c-rsx DKintegra is a jewel in the rough of c-rsx DKintegra is a jewel in the rough of c-rsx DKintegra is a jewel in the rough of c-rsx DKintegra is a jewel in the rough of c-rsx DKintegra is a jewel in the rough of c-rsx DKintegra is a jewel in the rough of c-rsx DKintegra is a jewel in the rough of c-rsx
Vtec Killer turbo a3 vtc phase gap P0341 code after cam change

my a3 has been boosted for over 25,000kms of dd use with no VTC issues at all it was just very sluggish in the top end like 5500 - limiter was painful

so i decided to switch out the horrible 3 piece plastic intake manifold for a RBB 2 piece off the floor and put A2 cams with 2 sets of a3 exhaust rockers and replaced the tensioner with a new factory one

now the car is stronger than ever from 5500-7500 it is Great but below that it is comically slow and then it just totally turns on. the problem i have found is that i have a vtc phase gap code and my actual cam angle is Zero and stays there and my maps stay at the zero degrees I used the a3 cam Gears And sensor trigger things when i did the cam swap is that where i went wrong ? am i off a tooth on the timing chain or something ? any advice would be much appreciated
DKintegra is offline   Reply With Quote
Reply

Bookmarks

Tags
cam , change , code , gap , killer , p0341 , phase , turbo , vtc , vtec

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Code P0341 VTC phase gap tkane4389 Problems & Solutions RSX 0 08-21-2013 08:33 PM
VTP Phase Gap and Catalyst System Efficiency Below Threshold P0341 P0420 raiser Problems & Solutions RSX 3 09-08-2011 04:17 PM
VTC phase Gap?!?!? woosah_navy All Motor RSX 11 06-28-2011 09:28 PM
VTC Phase Gap Error P0341 vill0169 Problems & Solutions RSX 7 06-17-2009 08:04 AM
Toda VTEC killer camshaft & VTC Cam pulley 62-1 All Motor RSX 9 12-02-2005 07:53 PM


All times are GMT -5. The time now is 05:44 AM.


Privacy Policy  |  Disclaimer Notice
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright 2001-2012, Club RSX, Inc. All rights reserved worldwide.
This website is owned and operated by Club RSX, Inc.
Club RSX, Club EP3, and Club ILX are not affiliated with American Honda Motor Co., Inc.