Jmercado Bracket Belt Sizes - Club RSX Message Board
Go Back   Club RSX Message Board > PERFORMANCE BASICS RSX > Supercharging RSX
Use the same user name on Club RSX, Club EP3, and Club ILX!

Reply
 
Thread Tools
Old 11-05-2008, 07:31 PM   #1
jmercado567
Master Member
 
jmercado567's Avatar
 
Join Date: Aug 2005
Posts: 2,954
iTrader: (34)
jmercado567 is an unknown quantity on c-rsx
Jmercado Bracket Belt Sizes

PM ME... your setup and we will add to the list.

Use the following

Supercharger type:
Crank Pulley TYPE:
Spacers used or Spacers not used
supercharger pulley size:
belt brand
belt size

Jackson Racing Charger
Setup with AC and Alternator spacers installed

===========================================
Crank Pulley: K20z1

**SC Pulley: 3”
Goodyear Gatorback 4060805

**SC Pulley: 3.2
Goodyear Gatorback 4060812

**SC Pulley: 3.4
Goodyear Gatorback 4060815

=======================================
Crank Pulley: K20A2

**SC Pulley: 3”
Goodyear Gatorback 4060810
Goodyear Gatorback 4070810 (7Rib)
Gates 4060806

**SC Pulley: 3.2
Dayco 5060805
Goodyear Gatorback 4060815

**SC Pulley: 3.4
Goodyear Gatorback 4060815

=======================================
+++++++++++++++++++++++++++++++++++++++
=======================================
BELOW THIS LINE
Jackson Racing Setup WITHOUT AC and Alternator spacers

=======================================
Crank Pulley: K20z1

**SC Pulley: 3”
Supercharger type:JRSC
Crank Pulley TYPE:Z1
Spacers not used
supercharger pulley size: 3.0"
belt brand: gator
belt size 4070810

**SC Pulley 3.2”
JRSC - 3.2" pulley
A2 - crank pulley
belt size: 4060812
without spacers


**SC Pulley 3.4”



=======================================
Crank Pulley K20A2

**SC Pulley: 3”
Goodyear Gatorback 4060812

**SC Pulley: 3.2"


**SC Pulley 3.4"

A2 crank pulley
3.4" blower pulley
NO A/C or alternator brackets
Goodyer Gatorback 4060827

=============================================
Others setups


K24 Block
K24 cp
3.2" bp
no spacers
4060817
====================

K24 Block
K24 cp
3.2" bp
no spacers
4060817

===============================
Dittorsx
3.2 pulley
jrsc
k24 crank pulley
good year 4060817
spacers used

this setup works perfect for me , and im hiting a peak of 13 psi and 11.5 to 12.5 psi contant

===============================================
User: Kingnacho83
Supercharger type:EP3 JRSC
Crank Pulley TYPE: A3
Spacers not used: NO
supercharger pulley size: 3.8"
belt brand: Gatorback 4070662
belt size: 62.22" 7 Rib
PSI:7-8 ( 8psi Peak@8800rpm)
====================================
User: TK-421
K24 Block
K24 cp
3" bp
no spacers
4060815

K24 Block
08-09 Accord K24 cp
3" bp
no spacers
4060817
====================================

k20z1
jmercado bracket
no spacers
3.0 blower pulley
k24 crank pulley

4060815 or
4080815 ( cut extra rib, its what i did)
User: himsweet66six
__________________
Get power
Documented Twin Screw Record: 424HP 301TQ 16-17psi http://forums.clubrsx.com/showthread.php?t=626669

Last edited by jmercado567; 01-31-2010 at 12:11 AM..
jmercado567 is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 11-05-2008, 07:55 PM   #2
renrab
above status quo
 
renrab's Avatar
 
Join Date: Oct 2006
Posts: 2,399
iTrader: (31)
renrab is cool, not as cool as some though renrab is cool, not as cool as some though renrab is cool, not as cool as some though renrab is cool, not as cool as some though renrab is cool, not as cool as some though renrab is cool, not as cool as some though renrab is cool, not as cool as some though renrab is cool, not as cool as some though renrab is cool, not as cool as some though renrab is cool, not as cool as some though renrab is cool, not as cool as some though renrab is cool, not as cool as some though
reserved

renrab is offline   Reply With Quote
Old 11-05-2008, 08:11 PM   #3
DAKREN12
Old School
 
DAKREN12's Avatar
 
Join Date: Sep 2005
Location: San Mateo
Posts: 2,173
iTrader: (15)
DAKREN12 is an unknown quantity on c-rsx
JRSC RSX-S
K20z1 with K20a2 CP
Spacers USED.
Supercharger pulley 3.2"
Gatorback Poly-V
4060812
6 ribs
__________________
2006 Magnesium Metallic RSX Type-S Supercharged @ 7psi..... I miss youuuu

But 2010 Subaru STI I Love youuuuuuu

Last edited by DAKREN12; 12-31-2008 at 12:24 AM..
DAKREN12 is offline   Reply With Quote
 
Old 11-05-2008, 09:50 PM   #4
bluetorch
Not Fast Enough...
 
bluetorch's Avatar
 
Join Date: Jul 2006
Location: Minnesota
Posts: 358
iTrader: (5)
bluetorch is an unknown quantity on c-rsx
Supercharger type: JRSC
Crank Pulley TYPE: A2
Spacers used or Spacers not used
supercharger pulley size: 3.2"
belt brand: Dayco 5060805
belt size: 80.5" 6 Rib

Last edited by bluetorch; 11-07-2008 at 01:21 PM..
bluetorch is offline   Reply With Quote
Old 11-05-2008, 09:51 PM   #5
DAKREN12
Old School
 
DAKREN12's Avatar
 
Join Date: Sep 2005
Location: San Mateo
Posts: 2,173
iTrader: (15)
DAKREN12 is an unknown quantity on c-rsx
u fit the 80.5?
__________________
2006 Magnesium Metallic RSX Type-S Supercharged @ 7psi..... I miss youuuu

But 2010 Subaru STI I Love youuuuuuu
DAKREN12 is offline   Reply With Quote
Old 11-05-2008, 10:03 PM   #6
bluetorch
Not Fast Enough...
 
bluetorch's Avatar
 
Join Date: Jul 2006
Location: Minnesota
Posts: 358
iTrader: (5)
bluetorch is an unknown quantity on c-rsx
Quote:
Originally Posted by Dakren12 View Post
u fit the 80.5?
Yeah without a problem, and now that the belt is fully broken in there is still a lot of movement left for the tensioner

I actually got the belt on by putting it on all the pulleys, even the p/s, first and then putting in on the tensioner pulley last. Since it (the tensioner pulley) doesn't have a rib you have to get over it just slipped right on without a hassle.

Last edited by bluetorch; 11-05-2008 at 10:50 PM..
bluetorch is offline   Reply With Quote
Old 11-05-2008, 10:40 PM   #7
jmercado567
Master Member
 
jmercado567's Avatar
 
Join Date: Aug 2005
Posts: 2,954
iTrader: (34)
jmercado567 is an unknown quantity on c-rsx
Quote:
Originally Posted by bluetorch View Post
Supercharger type: JRSC
Crank Pulley TYPE: A2
Spacers used or Spacers not used
supercharger pulley size: 3.2"
belt brand: Dayco
belt size: 80.5"
number of ribs?
thanks.
__________________
Get power
Documented Twin Screw Record: 424HP 301TQ 16-17psi http://forums.clubrsx.com/showthread.php?t=626669
jmercado567 is offline   Reply With Quote
Old 11-07-2008, 08:57 AM   #8
Surferboy
Been there & gone back
 
Surferboy's Avatar
 
Join Date: Aug 2006
Location: Hurst, Texas
Posts: 2,315
iTrader: (33)
Surferboy is a jewel in the rough of c-rsx Surferboy is a jewel in the rough of c-rsx Surferboy is a jewel in the rough of c-rsx Surferboy is a jewel in the rough of c-rsx Surferboy is a jewel in the rough of c-rsx Surferboy is a jewel in the rough of c-rsx Surferboy is a jewel in the rough of c-rsx Surferboy is a jewel in the rough of c-rsx Surferboy is a jewel in the rough of c-rsx
Supercharger type: JRSC
Crank Pulley TYPE: A2
Spacers used
supercharger pulley size: 3.0"
belt brand: Gates 4060806
belt size: 81 1/4" 6 Rib

Last edited by Surferboy; 11-07-2008 at 09:18 AM..
Surferboy is offline   Reply With Quote
Old 11-07-2008, 09:13 AM   #9
sharper
Alky fed rat.
 
sharper's Avatar
 
Join Date: Dec 2006
Posts: 1,637
iTrader: (8)
sharper is an unknown quantity on c-rsx
Supercharger type: JRSC
Crank Pulley TYPE: A2
Spacers not used
supercharger pulley size: 3.0"
belt brand: Gatorback 4070810
belt size: 80.98" 7 Rib

Working perfectly
__________________
K24 - all the cool kids are doing it. 373whp/281tq

Quote:
Originally Posted by erik loza View Post
You don't learn to swim by asking everyone else how the water is. You gotta' jump the fuck in.
sharper is offline   Reply With Quote
Old 11-07-2008, 09:14 AM   #10
Carlow
BELT driven ASS whippen
 
Carlow's Avatar
 
Join Date: Apr 2006
Posts: 986
iTrader: (13)
Carlow is cool, not as cool as some though Carlow is cool, not as cool as some though Carlow is cool, not as cool as some though Carlow is cool, not as cool as some though Carlow is cool, not as cool as some though Carlow is cool, not as cool as some though Carlow is cool, not as cool as some though Carlow is cool, not as cool as some though Carlow is cool, not as cool as some though Carlow is cool, not as cool as some though Carlow is cool, not as cool as some though Carlow is cool, not as cool as some though Carlow is cool, not as cool as some though Carlow is cool, not as cool as some though
Supercharger Type: Jackson Racing Supercharger
Crank Pulley TYPE: A2
Spacers: Used
Supercharger Pulley Size: 3.0"
belt brand: Goodyear Gatorback
belt size: 4070810

Operating Perfectly

__________________
S2 CAMMED JRSC 13PSI- 312WHP 213TRQ SOLD
http://forums.clubrsx.com/showthread...0#post21403870 SHOWOFF THREAD

Last edited by Carlow; 03-03-2009 at 02:21 PM..
Carlow is offline   Reply With Quote
Old 11-07-2008, 09:21 AM   #11
Carlow
BELT driven ASS whippen
 
Carlow's Avatar
 
Join Date: Apr 2006
Posts: 986
iTrader: (13)
Carlow is cool, not as cool as some though Carlow is cool, not as cool as some though Carlow is cool, not as cool as some though Carlow is cool, not as cool as some though Carlow is cool, not as cool as some though Carlow is cool, not as cool as some though Carlow is cool, not as cool as some though Carlow is cool, not as cool as some though Carlow is cool, not as cool as some though Carlow is cool, not as cool as some though Carlow is cool, not as cool as some though Carlow is cool, not as cool as some though Carlow is cool, not as cool as some though Carlow is cool, not as cool as some though

Last edited by Carlow; 12-23-2008 at 06:06 PM..
Carlow is offline   Reply With Quote
Old 11-07-2008, 09:24 AM   #12
sharper
Alky fed rat.
 
sharper's Avatar
 
Join Date: Dec 2006
Posts: 1,637
iTrader: (8)
sharper is an unknown quantity on c-rsx
Quote:
Originally Posted by bstelth View Post
**SC Pulley: 3
Goodyear Gatorback 4060810
I only found this in a 7rib there is no 6 rib for goodyear gatorback, iam still going to try the 7rib
7 Rib is the one you need. Part# 4070810
__________________
K24 - all the cool kids are doing it. 373whp/281tq

Quote:
Originally Posted by erik loza View Post
You don't learn to swim by asking everyone else how the water is. You gotta' jump the fuck in.
sharper is offline   Reply With Quote
Old 11-07-2008, 12:25 PM   #13
2002van
Member
 
Join Date: Sep 2008
Posts: 30
iTrader: (0)
2002van is an unknown quantity on c-rsx
help me here ..

may be i am using the wrong belt .. i found the first gear and second gear sliping .
may be its the problem of belt , or the clutch , but the clutch is new ..

the belt i am using
jrsc
belt brand name : gates
K070786
pully size 3.2
with AC
k20a2
information of the belt
Effective Length (In.) 78.62

Effective Length (mm) 1997

Number of Ribs 7

Outside Circumference (In.) 79.183

Outside Circumference (mm) 2011

Top Width (In.) .947

Top Width (mm) 24
2002van is offline   Reply With Quote
Old 11-07-2008, 01:25 PM   #14
bluetorch
Not Fast Enough...
 
bluetorch's Avatar
 
Join Date: Jul 2006
Location: Minnesota
Posts: 358
iTrader: (5)
bluetorch is an unknown quantity on c-rsx
I think your problem is that you're not using a Jmercado bracket
bluetorch is offline   Reply With Quote
Old 11-07-2008, 01:52 PM   #15
sharper
Alky fed rat.
 
sharper's Avatar
 
Join Date: Dec 2006
Posts: 1,637
iTrader: (8)
sharper is an unknown quantity on c-rsx
Quote:
Originally Posted by 2002van View Post
help me here ..

may be i am using the wrong belt .. i found the first gear and second gear sliping .
may be its the problem of belt , or the clutch , but the clutch is new ..

the belt i am using
jrsc
belt brand name : gates
K070786
pully size 3.2
with AC
k20a2
information of the belt
Effective Length (In.) 78.62

Effective Length (mm) 1997

Number of Ribs 7

Outside Circumference (In.) 79.183

Outside Circumference (mm) 2011

Top Width (In.) .947

Top Width (mm) 24
This Thread is for te Jmercado bracket specically, doesn't sound like you have that. A datalog in Kpro is the best way to tell if its belt slip. If its your bclutch you will know if you get on the highway in 6th and accelerate, lots of revs and no mph.... clutch.
__________________
K24 - all the cool kids are doing it. 373whp/281tq

Quote:
Originally Posted by erik loza View Post
You don't learn to swim by asking everyone else how the water is. You gotta' jump the fuck in.
sharper is offline   Reply With Quote
Old 11-12-2008, 04:09 PM   #16
RSXr4c3r
Artic Blue RSX-S!
 
Join Date: Jul 2002
Location: Houston
Posts: 959
iTrader: (10)
RSXr4c3r is an unknown quantity on c-rsx
hey....what belt comes with the street kit and will that belt fit the 3.2" pulley with a2 cp on ur your bracket?
RSXr4c3r is offline   Reply With Quote
Old 11-12-2008, 05:24 PM   #17
jmercado567
Master Member
 
jmercado567's Avatar
 
Join Date: Aug 2005
Posts: 2,954
iTrader: (34)
jmercado567 is an unknown quantity on c-rsx
Quote:
Originally Posted by RSXr4c3r View Post
hey....what belt comes with the street kit and will that belt fit the 3.2" pulley with a2 cp on ur your bracket?
the belt it comes with does not fit. see if the are willing to price without the manual tensioner and belt.
__________________
Get power
Documented Twin Screw Record: 424HP 301TQ 16-17psi http://forums.clubrsx.com/showthread.php?t=626669
jmercado567 is offline   Reply With Quote
Old 11-12-2008, 05:44 PM   #18
RSXr4c3r
Artic Blue RSX-S!
 
Join Date: Jul 2002
Location: Houston
Posts: 959
iTrader: (10)
RSXr4c3r is an unknown quantity on c-rsx
no..i already have that setup on my car rite now....and im thinkin about buying the bracket from you but since u said the belt will not fit....im gonna have to buy the belt too then
RSXr4c3r is offline   Reply With Quote
Old 11-12-2008, 05:59 PM   #19
jmercado567
Master Member
 
jmercado567's Avatar
 
Join Date: Aug 2005
Posts: 2,954
iTrader: (34)
jmercado567 is an unknown quantity on c-rsx
Quote:
Originally Posted by RSXr4c3r View Post
no..i already have that setup on my car rite now....and im thinkin about buying the bracket from you but since u said the belt will not fit....im gonna have to buy the belt too then
gotcha.
__________________
Get power
Documented Twin Screw Record: 424HP 301TQ 16-17psi http://forums.clubrsx.com/showthread.php?t=626669
jmercado567 is offline   Reply With Quote
Old 11-13-2008, 09:08 PM   #20
mr.k20z
Senior Member
 
mr.k20z's Avatar
 
Join Date: Apr 2006
Location: northeast.... mass
Posts: 401
iTrader: (7)
mr.k20z is an unknown quantity on c-rsx
what do you guys think?? maybe the 82.2 ?????

Supercharger type:jrsc
Crank Pulley TYPE:k24
Spacers used or Spacers not used:no
supercharger pulley size:3,2
belt brand not sure
belt size notsure
mr.k20z is offline   Reply With Quote
Old 11-13-2008, 10:32 PM   #21
jmercado567
Master Member
 
jmercado567's Avatar
 
Join Date: Aug 2005
Posts: 2,954
iTrader: (34)
jmercado567 is an unknown quantity on c-rsx
Quote:
Originally Posted by mr.k20z View Post
what do you guys think?? maybe the 82.2 ?????

Supercharger type:jrsc
Crank Pulley TYPE:k24
Spacers used or Spacers not used:no
supercharger pulley size:3,2
belt brand not sure
belt size notsure
you will have to try and start with the 4060815 or similar lenght and see where that takes you. We all had to go thru the initial testing pains. I do not think anyone of us had tried that combo yet.
__________________
Get power
Documented Twin Screw Record: 424HP 301TQ 16-17psi http://forums.clubrsx.com/showthread.php?t=626669
jmercado567 is offline   Reply With Quote
Old 11-22-2008, 11:29 PM   #22
DC5hondaintegra
JRSC@~13psi on Alcohol
 
DC5hondaintegra's Avatar
 
Join Date: Mar 2006
Location: VA
Posts: 1,531
iTrader: (3)
DC5hondaintegra is an unknown quantity on c-rsx
what do you guys think?

JRSC
A2 CP
no spacers
3.2" pulley
belt size?? i'm thinking Goodyear gatorback 4060815...
__________________
2003 ABP RSX-S
|JRSC with 3.0" Pulley|Coolingmist Meth Injection Kit|AEM CAI|DCRH(SS) |70MM Greddy Ti-C Exhaust|K-PRO|Precision 650cc Injectors|Hondata 4 Bar MAP Sensor|Jmercado Bracket|Innovative 60A Mount Kit|Innovative 75A Front Mount|Bronze 17x8 Work Emotions|Seibon Spoon Style CF Lip|A-SPEC Sides/Rear|BC N+ Coilovers|OEM Blacked Out Headlights|
Awaiting install: CC Stage 2 Clutch
DC5hondaintegra is offline   Reply With Quote
Old 11-23-2008, 12:23 AM   #23
knwldge54
doesn't even have an RSX
 
knwldge54's Avatar
 
Join Date: Nov 2005
Location: Barksdale AFB, LA
Posts: 28,924
iTrader: (35)
knwldge54 is cool, not as cool as some though knwldge54 is cool, not as cool as some though knwldge54 is cool, not as cool as some though knwldge54 is cool, not as cool as some though knwldge54 is cool, not as cool as some though knwldge54 is cool, not as cool as some though knwldge54 is cool, not as cool as some though knwldge54 is cool, not as cool as some though knwldge54 is cool, not as cool as some though knwldge54 is cool, not as cool as some though knwldge54 is cool, not as cool as some though knwldge54 is cool, not as cool as some though knwldge54 is cool, not as cool as some though knwldge54 is cool, not as cool as some though
This shit's all confusing. I use a 81 1/4" Dayco with the spacers installedm 3" pulley and A2 CP. Check jmercado's other thread and download the pdf file. I think there are more accurate numbers in that one.

http://forums.clubrsx.com/showthread.php?t=555282
knwldge54 is offline   Reply With Quote
Old 11-24-2008, 11:38 AM   #24
JM RSX
Hung
 
JM RSX's Avatar
 
Join Date: May 2005
Location: Sugar Land, TX
Posts: 805
iTrader: (23)
JM RSX is an unknown quantity on c-rsx
Where did you guys get your goodyear gatorback 4070810? I went to Autozone where I usually got my 4070775 for my old tensioner and they don't have it. =(

Right now I'm running a 6 rib 82.25 Gates and it's temporary at best. Thanks.
JM RSX is offline   Reply With Quote
Old 11-24-2008, 01:43 PM   #25
knwldge54
doesn't even have an RSX
 
knwldge54's Avatar
 
Join Date: Nov 2005
Location: Barksdale AFB, LA
Posts: 28,924
iTrader: (35)
knwldge54 is cool, not as cool as some though knwldge54 is cool, not as cool as some though knwldge54 is cool, not as cool as some though knwldge54 is cool, not as cool as some though knwldge54 is cool, not as cool as some though knwldge54 is cool, not as cool as some though knwldge54 is cool, not as cool as some though knwldge54 is cool, not as cool as some though knwldge54 is cool, not as cool as some though knwldge54 is cool, not as cool as some though knwldge54 is cool, not as cool as some though knwldge54 is cool, not as cool as some though knwldge54 is cool, not as cool as some though knwldge54 is cool, not as cool as some though
Summitracing.com
knwldge54 is offline   Reply With Quote
Reply

Bookmarks

Tags
belt , bracket , crank , inch , jmercado , jmercando , jrsc , pulley , sizes , spacershelp

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:28 AM.


Privacy Policy  |  Disclaimer Notice
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright 2001-2012, Club RSX, Inc. All rights reserved worldwide.
This website is owned and operated by Club RSX, Inc.
Club RSX, Club EP3, and Club ILX are not affiliated with American Honda Motor Co., Inc.